Enhanced Visibility - 0-40 PSI - Black Bevel / Black Face
This gauge can save your injection pump. If supply pressure is lost, the injection pump overheats and fails causing a major expense
Fits 3-2 1/16" Gauges.
This weld bushing is required if thermocouple is to be installed in exhaust pipe.
A thermocouple is the sending unit required for a pyrometer gauge. Used in conjunction with a leadwire, our thermocouple has an adjustable probe to fit almost every application
100-280F CHR - Chrome Bevel / White Face The Enhanced Visibility Transmission Oil Temperature Gauge comes with 1/8 inch NPTF matched sending unit, 1/4 inch NPT, 3/8 inch NPT, and 1/2inch NPT adapter bushings
Enhanced Visibility - Black Bevel / Black Face A pyrometer measures exhaust gas temperatures or egt's and advises you when you are pushing your GM engine too hard.
Enhanced Visibility - Black Bevel / Black Face / Colour Coded Dial A pyrometer measures exhaust gas temperatures or egt's. A pyrometer advises you when you are pushing your engine too hard. It can also be used as a diagnostic aid if you feel your truck may not be performing as it should.
Enhanced Visibility - Chrome Bevel / White Face A pyrometer measures exhaust gas temperatures and or egt's, advises you when you are pushing your engine too hard, plus so much more.
100-280F CHR - Black Bevel / Black Face The Enhanced Visibility (EV) Trans Oil Temperature Gauge 100-280F Black/White comes with signal amplifier and sender (matched set), T-5 bulb type. Supplied with 1/8” NPT temperature sender and 1/4, 3/8, 1/2 inch NPT adapters
140-320F CHR - Chrome Bevel / White Face Cutting-edge quality is what you get with an ISSPRO Gauge!
100-280F CHR - Black Bevel / White Face Electrical Temperature Gauges (270 degree) Provided with amplifier and sender (matched set). T-5 bulb type. Supplied with 1/8inch NPT temperature sender and 1/4, 3/8, 1/2 inch NPT adapters
Single Gauge Holder underdash black
This handsome 2 1/16" mounting cup can be installed on the steering column or dash.
The Custom A-Pillar Mounting system is the cleanest install for the PMT. Installation is very simple, these Custom A-Pillar Mounts simply slide over the top of the stock A-Pillar. Some A-Pillars come to match vehicle interior colors, but all of the Custom A-Pillars can be painted to match any vehicle interior color. This pillar also has holes for the stock pillar speaker.
The leadwire is required to connect the thermocouple to the pyrometer. Our 10-ft unit is sufficient for all trucks and most industrial applications.
WHITE FACE, RED POINTER, NUMERALS LIGHT UP GREEN WHEN LIT!!! GREAT MATCH FOR 2004 & UP DODGE - PROVIDED W/SIGNAL AMPLIFIER ONLY - THERMOCOUPLE & LEADWIRE SOLD SEPARATELY
A pyrometer measures exhaust gas temperatures or egt's. A pyrometer advises you when you are pushing your engine too hard. It can also be used as a diagnostic aid if you feel your truck may not be performing as it should. DSG stocks top quality Isspro gauges.
Full Pillars cover the entire a-pillar creating the premier factory installation fit. Many, with some modification, can be used as complete replacements and are paintable. Built with the Heat Temp. U/V resistant (ABS) plastic materials, each is custom made for an excellent fit.
10 foot tubing & fitting kit required for turbo boost & fuel pressure gauges.
Another innovative diesel product you are sure to want for your Ford Powerstroke!
