This weld bushing is required if thermocouple is to be installed in exhaust pipe.
A thermocouple is the sending unit required for a pyrometer gauge. Used in conjunction with a leadwire, our thermocouple has an adjustable probe to fit almost every application
100-280F CHR - Chrome Bevel / White Face The Enhanced Visibility Transmission Oil Temperature Gauge comes with 1/8 inch NPTF matched sending unit, 1/4 inch NPT, 3/8 inch NPT, and 1/2inch NPT adapter bushings
Enhanced Visibility - 0-15 PSI - Black Bevel / Black Face Top quality Boost gauge. A boost gauge is an excellent aid for knowing how your engine is running
Enhanced Visibility - 0-15 PSI - Chrome Bevel / White Face A boost gauge is an excellent aid for knowing how your engine is running.
Enhanced Visibility - Black Bevel / Black Face A pyrometer measures exhaust gas temperatures or egt's and advises you when you are pushing your GM engine too hard.
Enhanced Visibility - Black Bevel / Black Face / Colour Coded Dial A pyrometer measures exhaust gas temperatures or egt's. A pyrometer advises you when you are pushing your engine too hard. It can also be used as a diagnostic aid if you feel your truck may not be performing as it should.
Enhanced Visibility - Chrome Bevel / White Face A pyrometer measures exhaust gas temperatures and or egt's, advises you when you are pushing your engine too hard, plus so much more.
100-280F CHR - Black Bevel / Black Face The Enhanced Visibility (EV) Trans Oil Temperature Gauge 100-280F Black/White comes with signal amplifier and sender (matched set), T-5 bulb type. Supplied with 1/8” NPT temperature sender and 1/4, 3/8, 1/2 inch NPT adapters
140-320F CHR - Chrome Bevel / White Face Cutting-edge quality is what you get with an ISSPRO Gauge!
100-280F CHR - Black Bevel / White Face Electrical Temperature Gauges (270 degree) Provided with amplifier and sender (matched set). T-5 bulb type. Supplied with 1/8inch NPT temperature sender and 1/4, 3/8, 1/2 inch NPT adapters
Single Gauge Holder underdash black
This attractive pillar mount dual gauge holder fits easily onto the pillar next to the windshield for convenience and safety
This handsome 2 1/16" mounting cup can be installed on the steering column or dash.
The leadwire is required to connect the thermocouple to the pyrometer. Our 10-ft unit is sufficient for all trucks and most industrial applications.
