The TG350 is the entry level option of the TOUGH Series® and provides the following displays: Oil Pressure, Engine Temperature, Fuel Level, Oil Level, Engine Hours, RPM and Battery Volatage as well as J1939 Diagnostic Trouble Codes and a 150 Event Log. Two customer-defined sensor parameters for temperature, pressure, voltage or levels can also be configured. For generator applications, the TG350 provides a display for 3-Phase AC voltage and Frequency. For applications requiring 3-Phase display of AC current, the TG410 model is recommended.

Tough Series TG410 Controller

The TG410 is the most advanced option in the TOUGH Series®, providing displays of Oil Pressure, Engine Temperature, Fuel Level, Oil Level, Engine Hours, RPM and Battery Voltage as well as J1939 Diagnostic Trouble Codes and a 150 Event Log. Two customer-defined sensor parameters for temperature, pressure, voltage or levels can also be configured. For generator applications, the TG410 provides a display of 3-Phase AC voltage, 3-Phase AC current, and frequency. A Modbus communications port is standard on the TG410 model, allowing connection of a remote annunciator or an Internet gateway for remote management. For applications requiring Auto Mains Failure operation, the TG350AMF model is recommended. All modules in this series are easily configured as either engine controllers or as generator controllers using either the front panel buttons or our PC configurator software.

Tough Series Pro TG

PRO TG controllers are ideally suited for severe duty applications where reliability is critical, such as mobile or stationary engine equipment and generators. The PRO TG is the most advanced generator option in the TOUGH Series®, providing full color displays of Oil Pressure, Engine Temperature, Fuel Level, Oil Level, Engine Hours, RPM and Battery Voltage as well as J1939 Diagnostic Trouble Codes and a 150 Event Log. The PRO also provides a display of 3-Phase AC voltage, 3-Phase AC current, and frequency. A Modbus communications port is standard, allowing connection of a remote annunciator or an Internet gateway for remote management.

Retro Kit Generator Upgrade Kit

Whether you're puting an older generator back in service or replacing the factory controls, chances are you have experienced the wasted time and aggravation of finding and wiring all the right components to upgrade to a new control panel. The cost of a replacement OEM control panel may be too much for some customers, especially if the generator is out of warranty. The DynaGen Retro Kit will work on virtually any generator and can be installed at a fraction of the cost of an OEM control panel. If you are looking to extend the life or increase the functionality of an older generator, consider the DynaGen Retro Kit. The DynaGen Retro Kit comes complete with a state-of-the-art TG410 digital control module, engine sensors, quick-start wiring harnesses and current sensing transformers, all wrapped up in our custom made steel.

For Variable Speed Engines

Tough Series Pro TE 

The TOUGH Series® PRO controllers are designed to provide complete control, protection and engine instrumentation for both standard and electronic CAN Bus engines. All modules in this series are easily configured using either the front panel buttons or our PC configurator software. PRO TE controllers are ideally suited for severe duty applications where reliability is critical, such as pumping or gas compression engine equipment. PRO TE is the most advanced option in the TOUGH Series®, providing full color displays of Oil Pressure, Engine Temperature, Fuel Level, Oil Level, Engine Hours, RPM and Battery Voltage as well as J1939 Diagnostic Trouble Codes and a 150 Event Log. Two customer-defined sensor parameters for temperature, pressure, voltage or levels can also be configured. A Modbus communications port is standard, allowing connection of a remote annunciator or an Internet gateway for remote management.

Tough Series TE

The TOUGH Series® TE controller is designed for variable-speed engines used in applications that require dependable operation over long periods such as pumping, irrigation, compressors, power units, and material processing equipment. The TE controller is ideal for remote applications where robustness and dependability are critically important. It can be easily configured for either mechanical or electronic CANbus engines.

Plug 'N' Play Engine Control Panel

Tough Series TE 410

Our Plug 'n' Play control panels are fully turnkey and provide auto start/stop, safely protections, and readouts of all critical sensors. The panels are designed for use with electronic engines with CANbus J1939, or with mechanical engines.