Print

Website Path: Home > Power Generation & Dewatering > DynaGen Controllers

DynaGen Controllers

GSC300 Digital Genset Controller

Includes 6 Engine Instruments

  • Designed to provide autostart control, protection and engine instrumentation for all types of diesel and gas generator sets.
  • Module is easily configured using the front panel buttons or our PC configurator software.
  • GSC300 provides direct mounting compatibility with other DynaGen controllers.

Incorporates the Functions of 6 External Gauges

  • The GSC300 displays 6 critical engine readings through a backlit digital display augmented by 8 high-intensity lights for failure and status conditions.
  • A built-in Auto/Manual/Off Switch is also included.

TG350 Auto Start Controller

Tough Series - For engines or generators

  • Tough series controllers are deigned to provide complete control, protection and engine instrumentation for both standart and electronic CAN Bus engines as well for generator applications.
  • All modules in this series are easily configured as either engine controllers or as generator controllers.
  • Tough series controllers are ideally suited for severe duty applications where is critical such as mobile or stationary engine equipment and generators.

TG350

  • The TG350 is the entry level option of the TOUGH series and provides the following displays: Oil Pressure, Engine Temp. Fuel Level, Engine Houers, RPM, Battery Voltage as well as J1939 Diagnostic Trouble Codes.
  • For generator applications, the TG350 provides a display for 3-Phase AC voltage and Frequency.

TG400 Mobile Generators 

Packing more capability into a small package

  • The new unit offers significant enhancements from the original version launched in 2006 while maintaining the initial goal of creating a small, but powerful and versatile generator set control. 
  • The second generator product builds on the success of the original GSC400 by adding more value in advanced gen-set control features.
  • GSC400 has the smallest space footprint in the genset controls market without sacrificing the display screen size, buttons or lamp indicators.

GSC400

  • The GSC400 controller has an operating voltage range of 7 to 32 VDC, a controller operating temperature range of -40 to 185F(-40 to 85C).
  • The 128 x 64 white-on-blue graphic LCD screen is designed for high readability in all conditions and the unit is housed in a high impact ABS UV-resistant enclosure.

TG410 TOUGH Series Auto Start Controller

TOUGH Series - For engines or generators

  • Tough series controllers are deigned to provide complete control, protection and engine instrumentation for both standart and electronic CAN Bus engines as well for generator applications.
  • All modules in this series are easily configured as either engine controllers or as generator controllers.
  • Tough series controllers are ideally suited for severe duty applications where is critical such as mobile or stationary engine equipment and generators

TG410

  • The TG410 is the most advanced option of the TOUGH series and provides the following displays: Oil Pressure, Engine Temp. Fuel Level, Engine Houers, RPM, Battery Voltage as well as J1939 Diagnostic Trouble Codes.
  • A Modbus comunications port is standard on the TG410 model, allowing connection of a remote annunciator or an Internet gateway for remote management. 

ES52 Auto Start Engine Controller

For Diesel and gas Engines

  • The ES52 is designed to provide auto start and protection for all types of diesel and gas engine-driven equipment.
  • The module is epoxy sealed in an ultra-compact package with mounting compatibility to an industry standard footprint.
  • Is Easily configured using on-board DIP switches and potentiometer adjustment.

 

 

 

GSC102 Auto Start Controller

OEM Auto Start Solution for Small Genset: Portables/Residential/Light Commercial

  • The GSC102 Series is low cost, full-featured auto start for small generator installations.
  • Factory-fixed settings prevent unauthorized field tampering.
  • The unit is supplied as a circuit card to be mounted within a customer supplied panel with appropriate labeling

    DSG Power Systems
230 29th Street East
Saskatoon SK  S7L 6Y6
 
Phone: 306-242-7644
Fax: 306-242-5457
Email: percyh@dieselservices.com